Hakon Group A Top 3 architectural hardware supplier in Thailand.

Product Name	Product Code	Description	Picture
Hinge	FBB179	Five knuckle full mortise hinges Standard weight ball bearing FBB179 (ANSI a8112) Steel – Polished and plated or phosphated and prime coated for painting FBB191 (US32D) (ANSI A5112) Stainless steel – Satin Finish - For medium weight doors of overage frequency - Equipped with two stanley permanently lubricated non-detachable ball bearings - Equipped with easily seated, non-rising pins - Pins in nonferrous hinges are stainless steel - Size : 4.0x4.0, 4.5x4.5, 5.0x4.0, 5.0x5.0, 6.0x5.0
Hinge	FBB168	Five knuckle full mortise hinge FBB168 steel-polished and plated or phosphated and prime coated for painting (ANSI A8111) FBB 199 (US32D) Stainless steel-Satin Finish (ANSI A5111) - For heavy doors or door where high frequency is expected, such as entrance door to office buildings, stores, public buildings and corridor entrance doors to offices - Equipped with four stanely permanently lubricated non-detachable ball bearings - Equipped with easily seated, non-rising pins - Pins in nonferrous hinge are stainless steel - Size : 4.5x4.5, 5.0x4.5, 5.0x5.0, 6.0x6.0
Hinge	CB1901	Three knuckle full mortise hinge Heavy weight concealed LifeStan Bearing CB1901 (ANSI A8111) Steel-Polished and plated or phosphated and prime coated for painting CB1961 (US32D)(ANSI A5111) Stainless steel-Satin Finish - For heavy door or doors where high frequency is expected, such as entrance door to office building, stores, public buildings and corridor entrance doors to offices - Concealed LifeStan bearing for trouble-free, long life-no oil, no grease, no maintenance - Heavy weight gauges increase available bearing surface area for maximum friction reduction - Stainless steel non rising pin resists rust or corrosion - Hole in botton tip for easy pin removal - Slim barrel with flush tips and pins - Size : 4.5x4.5, 5.0x4.5, 5.0x5.0, 6.0x4.5
Full mortise speing hinges	2060R	- Internal ratcher eliminates loose pins - UL Listed for doors up to 4”-0”x 8”-0” (4.5” size onlny) - Unique engineered skpring for extra closing power - Closing power is adjustable up or down
Hinge	BB783	Stanley ball bearing hinge Size : 4”x3”x2.0 mm 4”x3”x2.5 mm 4”x4”x2.5 mm 5”x3.5”x2.5 mm Finished : Satin stainless steel
Hinge	PB780	Stanley plain bearing hinge Size : 4”x3”x2.0 mm 4”x4”x2.5 mm 5”x3.5”x2.5 mm
Hinge	SW781	Stanley stainless washer/ring hinge Size : 4”x3”x2.0 mm 4”x4”x2.5 mm 5”x3.5”x2.5 mm
Hinge	PW782	Stanley Nylon washer/Ring Hinge Size : 4”x3”x2.0 mm 4”x4”x2.5 mm 5”x3.5”x2.5 mm
Full mortise hinge	CB168	Heavy weight full mortise CB168 (ANSI A8111) – Steel with steel pin and tip CB199 (ANSI A2111) – Brass with stainless steel pin and brass tip; Bronze with stainless steel pin and bronze tip CB199 (ansi a5111) – Stainless steel with stainless steel pin and tip • For use on heavy weight doors with high frequency use • Concealed bearing are made from engineer polymer material with PTFE and Aramid fiber • “CB” performance exceeds the requirements of ANSI/BHMA Grade 1 • LifeSpanhinge covered by a limited lifetime warranty for the life of the building • Bearing is maintenance free-no oil, no grease • Equipped with easily seated, non-rising pin • Hole in botton tip enables quick pin removal for ease of installation • Steel hinges are polished and plated to insure a fine durable finish or phosphated and prime coated for painting • Hinges are available in wide thrown – specifications upon request • Size :4.5”x4.5”, 5”x4.5”, 5”x5”, 6”x4.5”, 6”x5”, 6”x6”, 8”x6”, 8”x8”
Half surface	FBB173	Standard weight half surface FBB173 (ANSI A8412) Steel-polished and plated or phosphated and primed for painting FBB112 (ANSI A2412) Brass or Bronze – polished and finished FBB112 (32) (ANSI A5412) Stainless steel –highly polished FBB112 (32D) (ANSI A5412) Stainless steel-satin finish • For medium weight doors with edge rails that won’t hold screws, hung in hollow metal frames, of average frequency • Equipped with two permanently lubricated non-detachable ball bearing and reversible pins and tips • Pins in nonferrous hinges are stainless steel • Steel hinges are polished and plated to insure a fine durable finish • A back plate is recommended for use with these hinges • Equipped with reversible pins and tips • Packed with machine screw and grommet nuts for 1 ¾” (44 mm) doors • When used on wood frames-specify wood screws for frame leaf • Size : 4”, 4.5”, 5”