|
Product Name |
Product Code |
Description |
Picture |
|
Dead lock |
MS1850S |
The Maximum Security Deadbolt for aluminum door. Specified by door manufacturers the world over as original locking equipment. Bolt throw and special over center mechanism makes lock almost impossible to force or pry. Available in long throw, short throw or hook bolt styles.
Specifications :
Bolt Throw: Long throw-1-3/8, Short throw 13/16 Hook Bolt 13/16
Faceplate : Radius, bevel (specify RH or LH) or flat.
Backset : 7/8, 31/31, 1/ 1/8 or 1-1/2
Finish : 628, 313 or 335 standard. Consult factory for other finishes.
Cylinder : Uses standard mortise cylinder with ADAMS RITE style cam.
BHMA TYPE E8211
|
 |
|
Deadlock |
MS1850S-050 |
Hookbolt design for sliding doors made from commercial size rails. Also used in swinging doors. Overcenter locking principal and massive laminated stainless steel hookbolt combine combine to resist forced entry from any direction.
Specifications :
Bolt Throw : 13/16
Faceplate : Radius, bevel (RH or LH) or flat.
Backset : 7/8, 31/31, 1-1/8, 1-1/2.
Finish : 628, 313 or 335 Aluminum standard. Other finishes available.
Cylinder : uses standard mortise cylinder with ADAMS RITE dimensioned cam.
Strike : In metal jamb can be simple cut stot. See also MS4002 armored strike for aluminum, 4001 for wood. BHMA TYPE E8281/E8291
|
 |
|
Deadlatch |
4710 |
Heavy duty Deadlatch Series 4710
For metal stile glass doors. Normally fitted with cylinder outside and lever or paddle inside to give one-way traffic control. Can be converted to two-way unrestricted traffic by key in the same cylinder.
Specifications:
Bolt Trow : ½ Handing reversible except bevel face.
Faceplate: 628, 313 or 335 standard. Other finishes available.
Backset : 31/31, 1-1/8 or 1-1/2
Cylinder : Uses standard mortise cylinder with ADAMS RITE dimensioned cam.
Lever : See 4568, 4569 and 4590 (paddle).
Strike : 4502 01 finished. Available with longer face and/or long lip versions.
ANSI/BHMA TYPE E8231
|
 |
|
Lever for Deadlatch |
4550 |
MS Lever 4550
The Adams Rite MS Lever was designed to meet ADAMS RITE guideline for easy accessibility, while maintaining the masimum security afforded by doors with and MS deadbolt.
Installation is fast and simple, requiring only four drilled holes for preparation.
The sturdy handle efforlessy lock and unlock the deadbolt and always returns to the horizontal position. A patented cam makes this unique feature possible.
The built-in exit indicator gives a quick visual confirmation of the doors staus.
The MS lever was specifacally designed to fit any Adams Rite MS deadbolt.
|
 |
|
Latch Operator Paddle |
4590 |
Available to operator 4700 series latches or MS+1890 lock/latch. Particularly suitable for access by disabled person:pushes or pulls in direction of door swing rather than conventional levers down-then-out motion.
Specification:
Finish : 628, 313 or 335 Aluminum standard. Available plated in Brass or Chrome.
Hand : Specify push or pull and to left or to right. Can be field rehanded before affixing PUSH or PULL. Indicator plste.
Switch Optkion: 4590MA adds internal switch which can make or break an electrical circuit. 4590M has switch only, no drive mechanism to operator a latch.
Door Thickness : Standard for 1-3/4. Available for thicker doors.
|
 |
|
Deadbolt |
MS5017 |
Wood Door Deadbolt MS5017
For wood stile sliding glass doors. Similar to MS1847 for metal doors but whith deeper backset to clear recessed jamb pocket of wood slider. Bolt size and features same as MS1847.
Specification :
Face : 5/8 x 4-1/2 with full radius ends.
Case: ½ thick x1-19/32 deep.
Mounting : By throung bolt binder posts.
Strike : 4810 box type available.
BHMA TYPE E8292
|
 |
|
Deadbolt |
MS1847 |
Glass Door Deadbolt MS1847
For metal/glass patio door. Extremely compact stainless steel case (1/2 thick, 1-1/8 deep) with 3-ply stainless bolt is capable of resisting a half-ton of pulling or lifting force. Bolt is adjustable to compensate for setting or door/jamb misliagnment. A self-protecting feature retracts bolt if door is inadvertently slammed while bolt is in thrown position.
Specification :
Face: ½ x3-3/16. Available retangular or with full radius ends.
Backset : Approximately ¾.
Operation : See 100 turns, 4025 Cylinder Pull. ANSI/BHMA TYPE E8291
|
 |
|
Flush locksets |
4189/4190 |
All-Metal Flush locksets 4189/4190
For close bypassing, stacked or pocket sliders. Dead bolt similar to MS1847. 4189 has inside slide block operation only. 4190 has key cylinder outside.
Specifications :
Backset : Varible From 5/8 to 1-1/4/
Stile Thickness : 1 to 1-3/8 standard. Available up to 2.
Finish : Riteccoat 130 Satin silver standard.
Projection from Door Face : 1/10
Dummy Set : Matching 4195 available. BHMA TYPE E8291
|
 |
Mortise lock &
Cylinder
